Cereals ready-to-eat, ALPEN
Cereals ready-to-eat, ALPEN is a cereal, containing 352 calories per 100g. It is an excellent source of Carbohydrate and Phosphorus, providing 58% and 53% of the Daily Value respectively. This cereal is a moderate protein source, rich in dietary fiber. Breakfast cereals vary widely in nutrient density. Many are fortified with vitamins and minerals, which can contribute meaningfully to daily nutrient intakes. Our database tracks 61 nutrients for this food, plus glycemic index, environmental footprint data.
Top Nutrients
Data for 61 of 150 tracked nutrients
Nutrient Fingerprint
How this food scores across key nutrient categories, as a percentage of the daily recommended value per 100 g. Based on USDA DRIs for adults.
Complete Nutrient Profile
Macronutrients 9
| Nutrient | Per 100g | Unit | Per Serving | % DV |
|---|---|---|---|---|
| Water SR | 7.4 | g | — | 0% |
| Calories SR | 352 | kcal | — | — |
| Energy (kJ) SR | 1,473 | kj | — | — |
| Protein SR | 11.2 | g | — | 20% |
| Total Fat SR | 3.3 | g | — | — |
| Carbohydrate SR | 75.7 | g | — | 58% |
| Fiber SR | 9.1 | g | — | 24% |
| Total Sugars SR | 20.0 | g | — | — |
| Ash SR | 2.4 | g | — | — |
Minerals 9
| Nutrient | Per 100g | Unit | Per Serving | % DV |
|---|---|---|---|---|
| Calcium SR | 147 | mg | — | 15% |
| Iron SR | 3.0 | mg | — | 38% |
| Magnesium SR | 94.0 | mg | — | 24% |
| Phosphorus SR | 371 | mg | — | 53% |
| Potassium SR | 418 | mg | — | 12% |
| Sodium SR | 27.0 | mg | — | 2% |
| Zinc SR | 3.0 | mg | — | 27% |
| Copper SR | 0.30 | mg | — | 33% |
| Selenium SR | 17.3 | µg | — | 32% |
Vitamins 23
| Nutrient | Per 100g | Unit | Per Serving | % DV |
|---|---|---|---|---|
| Vitamin A (RAE) SR | 0 | µg | — | — |
| Vitamin A (IU) SR | 0 | IU | — | — |
| Retinol SR | 0 | µg | — | — |
| Beta-Carotene SR | 0 | µg | — | — |
| Alpha-Carotene SR | 0 | µg | — | — |
| Beta-Cryptoxanthin SR | 0 | µg | — | — |
| Lycopene SR | 0 | µg | — | — |
| Lutein + Zeaxanthin SR | 0 | µg | — | — |
| Vitamin C SR | 8.7 | mg | — | 10% |
| Vitamin D SR | 0 | µg | — | — |
| Vitamin D (IU) SR | 0 | IU | — | — |
| Vitamin E SR | 0.51 | mg | — | 3% |
| Vitamin K1 SR | 2.5 | µg | — | 2% |
| Thiamin (B1) SR | 0.40 | mg | — | 33% |
| Riboflavin (B2) SR | 0.40 | mg | — | 31% |
| Niacin (B3) SR | 2.1 | mg | — | 13% |
| Vitamin B6 SR | 0.28 | mg | — | 22% |
| Folate SR | 30.0 | µg | — | 8% |
| Folic Acid SR | 0 | µg | — | — |
| Folate (food) SR | 30.0 | µg | — | — |
| Folate (DFE) SR | 30.0 | µg | — | — |
| Vitamin B12 SR | 0.12 | µg | — | 5% |
| Choline SR | 30.7 | mg | — | 6% |
Fatty Acids 7
| Nutrient | Per 100g | Unit | Per Serving | % DV |
|---|---|---|---|---|
| Saturated Fat SR | 0.50 | g | — | — |
| Monounsaturated Fat SR | 1.3 | g | — | — |
| Polyunsaturated Fat SR | 0.93 | g | — | — |
| Cholesterol SR | 0 | mg | — | — |
| Omega-3 EPA SR | 0 | g | — | — |
| Omega-3 DPA SR | 0 | g | — | — |
| Omega-3 DHA SR | 0 | g | — | — |
Individual Fatty Acids 10
| Nutrient | Per 100g | Unit | Per Serving | % DV |
|---|---|---|---|---|
| Butyric Acid (4:0) SR | 0 | g | — | — |
| Caproic Acid (6:0) SR | 0 | g | — | — |
| Caprylic Acid (8:0) SR | 0.003 | g | — | — |
| Capric Acid (10:0) SR | 0 | g | — | — |
| Lauric Acid (12:0) SR | 0.008 | g | — | — |
| Myristic Acid (14:0) SR | 0.005 | g | — | — |
| Palmitic Acid (16:0) SR | 0.42 | g | — | — |
| Stearic Acid (18:0) SR | 0.03 | g | — | — |
| Linoleic Acid (18:2) SR | 0.88 | g | — | 5% |
| Linolenic Acid (18:3) SR | 0.04 | g | — | — |
Nutrient Density Score
The NRF9.3 score measures overall nutritional quality per 100 kcal. It rewards 9 nutrients to encourage (protein, fiber, vitamins A, C, E, calcium, iron, magnesium, potassium) and penalizes 3 to limit (saturated fat, added sugars, sodium). Higher is better; negative scores indicate the food is high in limit nutrients relative to its beneficial content.
NRF9.3 index: Fulgoni et al. (2009), J Nutr 139(8). DVs based on FDA 2020 reference values.
Nutrient Interactions in This Food
Nutrients in this food that enhance or compete with each other during absorption.
✔ Synergies — nutrients that help each other
Vitamin C dramatically enhances non-heme iron absorption by reducing Fe³⁺ to Fe²⁺ in the gut. Adding 75 mg vitamin C to a meal can increase iron absorption 3–4 fold.
Hallberg et al., Am J Clin Nutr, 1989
Vitamin B12 and folate are metabolically interdependent. B12 is needed to convert methyltetrahydrofolate back to tetrahydrofolate, enabling folate to participate in DNA synthesis.
Green et al., Nat Rev Dis Primers, 2017
Vitamin B6 may enhance intracellular magnesium accumulation. Combined supplementation has shown greater benefits for stress and anxiety than magnesium alone.
Pouteau et al., PLoS One, 2018
Vitamin C supports selenium's antioxidant function by maintaining the glutathione system in its reduced state.
Rayman, Lancet, 2012
Moderate protein intake enhances calcium absorption and supports bone health. The acid-ash hypothesis suggesting protein harms bones has been largely disproven.
Kerstetter et al., J Clin Endocrinol Metab, 2005
⚠ Antagonisms — nutrients that compete
Calcium inhibits both heme and non-heme iron absorption when consumed in the same meal. The effect is dose-dependent, with significant inhibition at 300+ mg calcium.
Hallberg et al., Am J Clin Nutr, 1991
High zinc intake induces metallothionein in enterocytes, which traps copper and blocks its absorption. Prolonged high-dose zinc can cause copper deficiency.
Prasad et al., JAMA, 1978; Fosmire, Am J Clin Nutr, 1990
Zinc and non-heme iron compete for the same intestinal transporter (DMT1). High doses of one can reduce absorption of the other when taken simultaneously.
Rossander-Hulten et al., Am J Clin Nutr, 1991
Very high calcium intake can reduce magnesium absorption by competing for shared intestinal transport pathways. A calcium:magnesium ratio above 2.6:1 may impair magnesium status.
Rosanoff et al., Nutr Rev, 2012
Phytates in high-fibre foods (whole grains, legumes) bind non-heme iron and reduce its bioavailability. Soaking, sprouting, and fermentation reduce phytate content.
Hurrell & Egli, Int J Vitam Nutr Res, 2010
Fatty Acid Profile
Breakdown of fat types per 100g. A healthy fat profile favours unsaturated fats (mono + poly) and a balanced omega-3 to omega-6 ratio.
How Cooking Changes Nutrients
Estimated percentage of each nutrient retained after cooking, based on USDA retention factors for the “Cereal” food category. Values of 100% mean no loss; lower values indicate nutrients lost to heat, water, or oxidation.
Source: USDA Table of Nutrient Retention Factors, Release 6 (2007). Retention values are category-level averages — actual retention depends on cooking time, temperature, and water volume.
Glycemic Impact
The Glycemic Index (GI) measures how quickly a food raises blood sugar on a 0–100 scale. Glycemic Load (GL) accounts for typical serving size. Low GI < 55, Medium 56–69, High ≥ 70.
GI data matched from: “Breakfast cereal (estimated from category)” · ●●● low confidence
Source: International Tables of Glycemic Index (Sydney University, 2021)
Environmental Impact
Environmental footprint per kilogram of food produced. Data represents the global average for the “Wheat & Rye (Bread)” category.
- Global averages: These figures are production-weighted averages from a meta-analysis of ~38,700 farms across 119 countries (Poore & Nemecek, 2018). Actual impact varies enormously by farming method, geography, and supply chain.
- System boundary: Cradle-to-retail only — does not include consumer transport, home cooking energy, or food waste.
- Soil carbon not included: This data does not account for soil carbon sequestration. Some argue that well-managed regenerative grazing partially offsets ruminant emissions; however, full lifecycle accounting — including methane, land-use change, and the opportunity cost of using land for grazing vs. reforestation — typically makes the net footprint of ruminant meat higher, not lower. This is especially relevant in temperate grassland regions like Ireland.
- Not gospel: This data is informational and illustrative. It is useful for understanding relative magnitudes, but should not be treated as precise measurements for any individual product or farm.
Source: Poore & Nemecek (2018), Science 360(6392). Meta-analysis of ~38,700 farms, 119 countries, 46 product categories.
Global Supply: Cereals
Top 10 countries by per capita supply of the “Cereals” food group (kcal/capita/day, 2023). This is food group–level data from FAO Food Balance Sheets, not specific to this individual food.
Global Supply Trend (1961–2023)
+8%Source: FAO Food Balance Sheets (2023). Supply = production + imports − exports − waste, converted to kcal/capita/day.
Related Foods in Breakfast Cereals
Frequently Asked Questions
How many calories are in Cereals ready-to-eat, ALPEN?
Cereals ready-to-eat, ALPEN contains 352 kcal per 100 grams, making it a calorie-dense food. The energy comes from 11.2g of protein (13% of calories), 3.3g of fat (8%), and 75.7g of carbohydrates (86%). Carbohydrates are the primary energy source.
What is Cereals ready-to-eat, ALPEN most nutritious for?
The standout nutrient in Cereals ready-to-eat, ALPEN is Carbohydrate, providing 75.7 g per 100g (58% of the Daily Value). It is also a notable source of Phosphorus (53% DV). Our database tracks 61 individual nutrients for this food, allowing detailed comparison across vitamins, minerals, amino acids, and fatty acids.
Is Cereals ready-to-eat, ALPEN high in protein?
Cereals ready-to-eat, ALPEN provides 11.2g of protein per 100 grams — a moderate amount. Protein contributes 13% of its calories.
How much fiber is in Cereals ready-to-eat, ALPEN?
Yes, Cereals ready-to-eat, ALPEN is rich in dietary fiber with 9.1g per 100 grams. The daily recommended intake is 25-38g, so a serving contributes meaningfully toward that goal. Dietary fiber supports digestive health and is associated with reduced risk of cardiovascular disease.
What is the glycemic index of Cereals ready-to-eat, ALPEN?
Cereals ready-to-eat, ALPEN has a glycemic index of 70, which is classified as high (≥70). High-GI foods cause a rapid spike in blood sugar. Pairing with protein, fat, or fiber can help moderate the glycemic response. The glycemic load, which accounts for typical serving size, provides additional context for real-world blood sugar impact.